數控車方機

 
ZSK0640數控車方機設備性能：

1、適應中小型零件銑外方，二.四.六.八方等。
      Adapl to mling o smal and medun-ized parts cutside, two, tour,ight. t

2、采用數控系統。可實現曲面，臺階面，孤性面，鏡面加工。

      Uaing a Pumerncal control ysterm, can reakze he processing of cuved Burtacer.

stepped surfacer soditary surtacos and conical surfaces

3、組作模式平動。半自動可選:可加裝送料裝置，實現全自動化生產，節省人力。

      Tihe operation mode manual and sem-automatie optionat, leding device can be

adbedo roalze Mly autonated production and MWe marpone.

4、車方機ZSK0640改變傳統銑方加工工藝，可提高2-5值效益，產品表面光法度高。

      Changing he Tadtonal miling processing Mechnokogy can increase the eficieney by

2-5 Bmes, and the urtace fniah o he producd m high

 設備參數：

工件車方直徑Dameter of worspiece car	10-100mm	銑方產品表面光潔度The roughness af producd surtace	1.6-3.2um
車方行程Car side rp	160mm	正常工作油泵壓力Nomal worting oll pump prossure	20-40pa
主軸通孔直徑Spinge hole dameter	φ48mm	X/Y軸伺服電機XY aies servo motor	6N.m6N.m
控管通孔直徑Drawn pipe hole dam	φ40mm	控制器變壓器Contoler Tansomer	1.5kW
主電機功率Main motor power	3kw-6	機床變壓器Machine tool ranstormaer	150w
安頻器Inverter	5.5kw	外部電源Exernal poner uppy	380vph50hz
主軸轉速范圍Spinde speed nange	100-1200pm	機床尺寸Machine outside aimensions	1880^1260-1620mm
車方對邊公量polygon olerance of oppoite side	100-1200pm	機床凈重Machine net weight	1300KG
車方長度公差polygon length tolerance	100-1200pm